To install this valve it requires me to cut the Fiberglass / tile to allow proper fittings, soldering etc, This I do using Special bits that dont crack the Gel coat on Fiberglass and Diamond bits to cut the tile.
TILE MUST BE IN GOOD SHAPE, NOT LOOSE AND COMING OFF THE WALL.
CuttingTile is an Additional $50.00 as the Diamond Bits are no good after job and must be disposed of.
This will be the last valve you ever have to buy!
The other alternative is to tear down the tile wall, or remove the tub and install a new one, if its fiberglass you will need to remove the walls above the tub, also the floor in front of the tub, then replace with a 3 piece tub and shower unit. The 3 piece unit has an ugly caulking line where each piece goes together. To replace the tub unit it will cost a minimum of $2500.00 to $5000.00.
The simple valve replacement as pictured is under $1000.00 a fraction of the cost!

COPPER AND BRASS ARE AT RECORD HIGH PRICES CURRENTLY.




Have Your Old Fixtures Like This Replaced To A New Gerber Pro Valve.
These Old 1 Handle Valves Pictured below are Illegal Per NH Plumbing Code
As of 2014 Code Requires all Valves and Faucets to be LEAD FREE

NH Plumbing Code Requires all Tub/Shower Valves be Anti Scald, Pressure Balance Valves with the proper ASSE compliance numbers Valves must turn on with cold water first.

Example: Ever flush a toilet while someone is in the shower? Does the shower water get hotter? That is not an accepted ASSE 1016 compliance valve. 3 Handle valves are no longer accepted unless there is an accepted ASSE compliance pressure balanced anti scald valve installed on the lines preceding the valve.
Full 5 Year Parts and Labor Warranty.
Well Water must be good or Warranty is Voided.
ReplaceMyValve.com
TUB SHOWER VALVE REPLACEMENT
By Tony Coppola Plumbing
Call me at 603-401-5678 or Text Me At 603-401-5678

Email Me At TonyCPlumbing@icloud.com

IF YOUR CURRENT SHOWER/TUB VALVE IS 10 YEARS OR OLDER IT DOES NOT MEET TODAYS CODES FOR ANTI SCALD PRESSURE BALANCE.  REPLACMENT PARTS ARE NOT READILY AVAILABLE.

REPLACE YOUR DELTA / MOEN/ PRICE PFISTER ETC VALVES WITH A 
GERBER PRO VALVE

All GERBER  Pro Valves are 100% Brass, No Plastic.
(Unlike The Big Box Stores retail valves)

5 YEAR 100% PARTS AND LABOR WARRANTY
WELL WATER MUST BE GOOD OR WARRANTY IS VOID.

 IT'S THE LAST VALVE YOU WILL EVER PURCHASE!
OVER 200 GERBER VALVES INSTALLED, WITH NO CUSTOMER COMPLAINTS!

BEST IF VIEWED FROM A DESKTOP 
OR LAPTOP COMPUTER.
WE INSTALL THE GERBER PRO VALVE IS USING AN ACCESS PANEL
 FROM A CLOSET/WALL BEHIND TUB/SHOWER.
PLEASE READ BELOW FOR DESCRIPTION. 

IF THERE IS NO CLOSET OR ACCESS BEHIND TUB/SHOWER A REMODELERS PLATE IS REQUIRED AT AN ADDITIONAL CHARGE SO ALL WORK CAN BE DONE FROM FRONT, THIS REQUIRES CUTTING FRONT OF UNIT/WALL FOR ACCESS AND USING THE REMODELERS PLATE 
BRUSHED NICKLE FINISH IS AVAILABLE.


GERBER  VALVES INSTALLED WITH A REAR ACCESS PANEL OR REMODELERS PLATE
​FOR A BETTER LOOK ACCESSING THROUGH BACK OF 
TUB/SHOWER WITH A REAR ACCESS PANEL IS BEST.
Many Ask Why does it cost so much? 
COPPER AND BRASS ARE AT RECORD HIGH PRICES.
Please scroll below and view the tools necessary as well as the steps that need to be taken to do the job, Thank you.
If your wall is Tile an additional $50.00 is required for Diamond bits that are used. They are burnt out and disposed of after job. Tile must be in good shape and not loose to cut.
Below is the procedure to install the valves.
Minimum Tools necessary, Tubing Cutter, Electric and Manual, Commercial Saw, Commercial Roto Zip with proper bits for Fiberglass and Tile. You must cut fiberglas with proper bit or the Gel Coat will melt or crack. Torch, Solder, Copper fittings and adapters, among other items in my van, wood for blocking hangers, etc.
Original Non State Approved Non Safety Valve
Remodelers Plate Template
Cut to remove old valve. 
Unsolder Old Valve Fittings For Removal.
Extreme care must be taken to not melt Tub Walls.
Old Valve Removed Pipes Cut and prepared for new Valve and fittings.
New Valve Fitted, Piped and being Soldered using Lead Free Silver Based Solder.
Extreme care must be taken to not melt Tub Walls.
New Pro Valve Roughed In Soldered and Tested.
Remodelers Plate Installed
If you would like one of these Valves Installed Call Me at 603-401-5678 or Click  Link Below To Send Me A Text
Text Me By Clicking Here 6034015678@vtext.com

REMODELERS PLATE IS USED IF THERE IS NO REAR ACCESS THERE IS AN  ADDITIONAL $100.00 CHARGE DUE TO FITTINGS AND DIFFICULTY.
THIS IS PLACED OF FRONT OF TUB/ SHOWER UNIT OR WALL.
REMOVABLE REAR ACCESS PANEL
(PICTURED TO THE RIGHT)
 IS USED IF THERE IS A CLOSET OR REAR ACCESS TO VALVE, THIS IS A MUCH NICER APPEARANCE THAN THE FRONT REMODELERS PLATE AND HAS NO ADDED COST. AS THE REMODELERS PLATE DOES.


REAR ACCESS PANEL, NO ADDITIONAL CHARGE
DETAILED INSTALLATION
PICTURES BELOW

IF THERE IS NO REAR ACCESS OR CLOSET TO ACCESS VALVE A REMODELERS PLATE IS USED THERE IS AN ADDITIONAL $100.00 DUE TO DIFFICULTY AND EXTRA MATERIALS.

TILE WALLS ARE ADDITIONAL $50.00 DUE TO THE DIAMOND BITS THAT ARE PURCHASED. 
THEY ARE ONLY GOOD FOR 1 TIME USE.

TILE WALLS ARE ADDITIONAL $50.00 DUE TO THE DIAMOND BITS THAT ARE PURCHASED. 
THEY ARE ONLY GOOD FOR 1 TIME USE.